CCNA, CCNP, Network Project Training
100% Success in
Class Schedule: CCNA, CCNP, Every Sunday 6pm-10pm
Please come to try the class one time for free!!!
Please call 416-665-1888 or email at davidli@viccollege.com for further inquiry and reservation.
CCNA/CCNP Certificated and Experience
Course Outline: (60 hours)
Module 1: Network Fundamental
Module 2: Introduce to Cisco routers and switches
Module 3: Routing Protocols basic
Module 4: Standard WAN technologies
Module 5: WLAN
Module 6: Network devices maintenance
Module 7: Cisco Layer 2 and Layer 3 Switches
Module 8: Routing Protocols advance
Module 9: QoS
Module 10: Multicast
Module 11: Security
Module 12: IPv6 advanced
Module 13: WAN advanced
Network devices include the following:
• 2 Cisco 3550 PoE Multilayer switches
• 1 Cisco 3620 router
• 3 Cisco 2600 serial routers
• 2 Cisco 3810 MCS routers
• 5 Cisco 2500 serial routers
• 1 Cisco 2924MX switch
• 1 Cisco 2950-24 switch
• 2 NetScreen 5GT firewalls
• 1 Cisco PIX firewall
• 1 Nokia IP330 firewall
• 1 Juniper SSA 700 VPN
• 6 Juniper routers
• 1 Cisco ACS (TACACS+ and RADIUS) server
Network Project
Course Outline: (60hours)
Module 1: Network Design theory and tools
Module 2: IOS upgrade project
Module 3: Big Office Network project
Module 4: Firewall setup and implementation project
Module 5: VPN network design and implementation project
Module 6: Internet Gateway project
Module 7: MPLS migration project
Module 8: Out of band Network Management project
Module 9: Network Optimization – QoS project
Module 10: Network Best Practice project
Module 11: Writing a Professional Resume
Module 12: Technical Interview preparation
Module 13: Voice over IP basic and implementation project
Module 14: Others
Network devices include the following:
• 2 Cisco 3550 PoE Multilayer switches
• 1 Cisco 3620 router
• 3 Cisco 2600 serial routers
• 2 Cisco 3810 MCS routers
• 5 Cisco 2500 serial routers
• 1 Cisco 2924MX switch
• 1 Cisco 2950-24 switch
• 2 NetScreen 5GT firewalls
• 1 Cisco PIX firewall
• 1 Nokia IP330 firewall
• 1 Juniper SSA 700 VPN
• 6 Juniper routers
• 1 Cisco ACS (TACACS+ and RADIUS) server
Instructor: Martin, CCIE, CCNA, SCSA, JICIS-FWV, CCSA NG, Senior Network Engineer in the top five bank of
Class Schedule: Network Project Training, Every Friday 6:30pm-10:30pm
CCNA/CCNP & Network Real Project free information Seminar on May. 9th Saturday 4:00pm
Class Schedule: Network Practice, Every Friday 6:30pm-10:30pm